Similarly to what I wrote for Fedora, here is how I was able to create an OpenSUSE 15 LXC container on an Ubuntu 18.04 (bionic) laptop.

Setting up LXC on Ubuntu

First of all, install lxc:

apt install lxc
echo "veth" >> /etc/modules
modprobe veth

turn on bridged networking by putting the following in /etc/sysctl.d/local.conf:

net.ipv4.ip_forward=1

and applying it using:

sysctl -p /etc/sysctl.d/local.conf

Then allow the right traffic in your firewall (/etc/network/iptables.up.rules in my case):

# LXC containers
-A FORWARD -d 10.0.3.0/24 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -s 10.0.3.0/24 -j ACCEPT
-A INPUT -d 224.0.0.251 -s 10.0.3.1 -j ACCEPT
-A INPUT -d 239.255.255.250 -s 10.0.3.1 -j ACCEPT
-A INPUT -d 10.0.3.255 -s 10.0.3.1 -j ACCEPT
-A INPUT -d 10.0.3.1 -s 10.0.3.0/24 -j ACCEPT

and apply these changes:

iptables-apply

before restarting the lxc networking:

systemctl restart lxc-net.service

Creating the container

Once that's in place, you can finally create the OpenSUSE 15 container:

lxc-create -n opensuse15 -t download -- -d opensuse -r 15 -a amd64 --keyserver hkp://keyserver.ubuntu.com

To see a list of all distros available with the download template:

lxc-create -n foo --template=download -- --list --no-validate

Logging in as root

Start up the container and get a login console:

lxc-start -n opensuse15 -F

In another terminal, set a password for the root user:

lxc-attach -n opensuse15 passwd

You can now use this password to log into the console you started earlier.

Logging in as an unprivileged user via ssh

As root, install a few packages:

zypper install vim openssh sudo man
systemctl start sshd
systemctl enable sshd

and then create an unprivileged user:

useradd francois
passwd francois
cd /home
mkdir francois
chown francois:100 francois/

and give that user sudo access:

visudo  # uncomment "wheel" line
groupadd wheel
usermod -aG wheel francois

Now login as that user from the console and add an ssh public key:

mkdir .ssh
chmod 700 .ssh
echo "<your public key>" > .ssh/authorized_keys
chmod 644 .ssh/authorized_keys

You can now login via ssh. The IP address to use can be seen in the output of:

lxc-ls --fancy